在开始制作之前，我们来看一看在效果，我们将创造图片中的效果。分层一直是我们的惯例。

Step 1
Let's start by making a new white document at 1000px by 1000px.

新建一个空白图像，背景白色，大小为1000*1000

Step 2
Now we'll make the base of the phone. Using the Rounded Rectangle Tool (U) set to 20 pixels, make a shape as shown below.

现在，我们将做出该手机的主体。使用圆角矩形工具（快捷键U），直径设置为20像素，画出一个形状，如下图所示。

Step 3
Next using the same tool you need to hold down the Alt button before you start making a shape. This will extract from the first shape you made. Also, use the

rulers and grid to help set the shape of the phone. When you're done name the shape "Phone shape 1."

您需要按住 Alt 的按钮，注意用上一步所用到的工具绘制。 这将从第一个形状所提取的。 此外，使用标尺和网格来帮助定位电话的形状。 当您完成时，请将形状重命名为"电话形状 1"。

Step 4
Next you need to duplicate this layer, fill the copy with #5b5b5b, and name it "Phone shape 2."

接下来需要复制此层，填充#5b5b5b ，并将其命名为电话形状2

Step 5
Enter the Blending Options by double-clicking in the "Phone shape 2" layer and enter the settings shown below. You can experiment, but I personally like those settings.

双击"电话形状 2"并设置样式（我根据个人的喜好设置，您可以进行适当的更改）

Step 6
Make a new layer and name it "light." Then Ctrl + Click on the "Phone shape 2" layer thumbnail to make a selection. Then using the Rectangular Marquee Tool (M), take out some of the selection.

使新图层，并将其命名高亮。 然后 Ctrl+ 单击"电话形状 2"层的缩略图，进行选择（创建选区）。 然后使用使用Marquee 工具 (M)，进行一些选择。

Step 7
Create a linear gradient using the Gradient Tool (G) set to white and transparent. Then drag and drop from up to down to achieve something similar to below.

创建一个图层，使用渐变工具 (G) 设置为白色和透明的线性渐变。然后从填充，就像下面一样。

Step 8
Using the Eraser Tool (E) set to 0% Hardness, start erasing some of that light, as shown below.

使用橡皮擦工具硬度设置为0％ ，开始擦除，如下图所示。

Step 9
Make paths at the bottom of the phone using the Pen Tool (P).

用钢笔在底部绘制一个路径 。

Step 10
Next you need to make a new layer and name it "light 2." Set your Brush to 1 pixel and also make sure the foreground is white. Grab the Pen Tool, right-click on the screen, and chose Stroke Path. Make sure you select the Brush from the list and also the Pen Pressure must not be checked. Than click OK. Lastly, you will need to delete the path so you can see the stroke.

接下来您需要进行新的层并命名"高光2"。您的画笔设置为 1 个像素，并还确保前台是白色。将画笔工具，右键单击屏幕和选择 Stroke 路径。确保从列表中选择，笔刷也不必须检查画笔压力。单击确定。 最后，您将需要删除路径，就象下图。